— Χαμηλής ορατότητος άρβυλο σχεδιασμένο για αποστολές με υψηλές απαιτήσεις προστασίας των ποδιών, όπως δασοπυρόσβεσης, διάσωσης, διαχείρισης/καταστολής πλήθους
— Ελαφρύ για την παρεχόμενη ασφάλεια και εύκαμπτο
— Εξαιρετικά σταθερό σε πορεία και τρέξιμο
— Επένδυση GORE-TEX® Performance Comfort εξαιρετική για μεταβαλλόμενες κλιματικές συνθήκες και υπαίθριες δραστηριότητες
— Πιστοποιημένα αδιάβροχο ακόμη και μετά 500.000 βηματισμούς σύμφωνα με το Ευρωπαίκό Πρότυπο EN ISO 20345 6.2.5
— Διαπνοή ανώτερη κατά 600% των απαιτήσεων του Ευρωπαϊκού Προτύπου EN ISO 20345 5.4.6
— Μόνωση κατά θερμότητος ανώτερη κατά 10% του Ευρωπαϊκού Προτύπου EN15090 6.3.1 (έκθεση στον ήλιο) και κατά 60% του EN 15090 6.3.2 (ακτινοβολούμενη θερμότητα)
— Αδιάτρητη σόλα κατά 50% ισχυρότερη από τις προδιαγραφές του Ευρωπαϊκού Προτύπου EN ISO 20345 6.2.1
— Η συγκόλληση (“τσιμέντωμα”) της σόλας είναι κατά 30% ισχυρότερη των προδιαγραφών του Ευρωπαϊκού Προτύπου EN ISO 20345 5.3.1.2
— Αντικραδασμική προστασία στην περιοχή της φτέρνας κατά 100% ανώτερη των προδιαγραφών του Ευρωπαϊκού Προτύπου EN ISO 20345 6.2.4
— Εξώσολα νιτριλίου, πιστοποιημένα ανθεκτική σε έκθεση σε έλαια και καύσιμα, θερμότητα και φωτιά. Αντιολισθητική στον μέγιστο βαθμό (SRC).
— Προστασία ακροδακτύλων και φτέρνας από ισχυρές ρητίνες, αντοχής κρούσης 500Ν
— Κορδόνια από NOMEX®, πυράντοχα και ισχυρά
— Ραφές από KEVLAR®
6011/GA-C EXPLORER II BOOT
Wildfire and public order operator boot
• Lining: GORE-TEX® Performance Comfort footwear, excellent for various climate conditions and for outdoor activities
• Lightweight and flexible wildfire boot, it offers excellent stability both for walking and running
• Highly breathable (breathability 600% higher than the European
Standard EN ISO 20345 5.4.6 requirement)
• Water resistant boot tested to 500.000 flexing cycles according to the European Standard EN ISO 20345 6.2.5
• Padded rear flexors
• Fast and easy lacing system
• Extremely comfortable for long-day usage
• The heat insulation is 10% higher than the European Standard
EN15090 6.3.1 requirements (sandbath test), and 60% higher than the European Standard EN 15090 6.3.2 requirements (radiant heat)
• The penetration resistance of the bottom is 50% higher than the
European Standard EN ISO 20345 6.2.1 requirement
• The sole bonding strength is 30% higher than the European Standard
EN ISO 20345 5.3.1.2 requirements
• The energy absorption in the heel area is 100% higher than the
European Standard EN ISO 20345 6.2.4 requirements
• Outsole resistant to fuel, oil, heat and flame
— Upper leather: Full-grain cowhide leather, waterproofed, black, 2.4 – 2.6 mm thick
— Top lining: Full-grain soft aniline leather, black, 1.0 – 1.1 mm thick
— Rear flexor: Soft waterproofed leather, padded with special foam to improve fitting comfort.
— Lining: Seam sealed 4 ply laminate (GORE-TEX® DURACOM CAMBRELLE), bootie
construction:
—- Layer 1 – Abrasion-proof lining Cambrelle® 100% PA
—- Layer 2 – Functional nonwoven 100% PES
—- Layer 3 – Waterproof and water vapour permeable ePTFE membrane
—- Layer 4 – Backing fabric knit 100% PA
— Toe cap: 1.8 mm resinated synthetic bonded fabric, thermally mouldable, tested for
compression resistance 500N
— Heel cap: 1.8 mm resinated synthetic bonded fabric, thermally mouldable.
— Sewing thread: Kevlar® Filament, permanent flame-retardant, water-repellent finish, black.
— Lace hooks: New Jolly hooks made out of burnished steel.
— Fixing hooks: ZAMA alloy totally rustproof, for the optimum lace fixing.
— Jointed open hooks: ZAMA alloy totally rustproof. The joints make lacing easier and faster.
— Laces: Meta-Aramid filament (Nomex®) round laces, black, water-repellent treated.
— Foot-bed: Anatomically shaped, made out of a layer of moisture transmitting felt (80% PES – 20% VISCOSA), and with an upper covering made of anti abrasion non wovenmaterial 100% PA. In the heel area is positioned an insert of EVA foam for
the best comfort of the foot enabling to preserve the foot anatomy and to increase
the energy absorption on the heel.
Insole
— Average 8 mm thick insole made by a multilayer construction using special antiperforation composite textile material “Zero mm Perforation” at 1100 Newton
according to the Standard EN 12568:2010, with a plastic reinforcement as stabilizer and completed with a felt filler on the bottom. Textile antiperforation
insoles, compared to the old style metal plates, offer considerable ergonomics and safety advantages: more protective surface, flexibility, insulation, moisture absorption, reduced weight.
— Sole: Nitrile rubber cemented sole, heat resistant at 300°C, antistatic, oil and petrol
resistant, with energy absorption in the heel area, slip-resistant SRC. Selfcleaning and foreign objects + debris free granted by the peculiar structure of cleats and running surface. Thanks to the double density of the rubber compound, the shock absorption and the slip resistance are considerably improved.
— Weight/pair: abt 2170 g (size 42)
— Back height: abt 24,5 cm (sole included) (size 42)
— CE certificate: EN 15090:2012 F1PA HI3 CI R SRC Category III P.P.E
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.