— Το ΕΛΑΦΡΥΤΕΡΟ (μόνο 0,875 χγρμ./άρβυλοΝο42, όσο ένα συνηθισμένο ορειβατικό) άρβυλο δασοπυροπροστασίας με τις ανώτερες προδιαγραφές και πιστοποιήσεις (EN 15090:2012 F1PA HI1 T CI AN SRC Category III P.P.E.) της αγοράς. Κατάλληλο για κάθε αποστολή που προϋποθέτει σοβαρή προστασία των ποδιών
— Το άνω μέρος αποτελείται από νέας, καινοτόμου σύνθεσης αραμιδικές ίνες, ενισχυμένες με KEVLAR® , πυράντοχες αλλά και διαπνέουσες και υδατοαπωθητικές
— Εξαιρετικά ελαφριά προστασία ακροδακτύλων αντοχής 200J από Novation RTM (Resin Transfer Moulding), συνθετικό υλικό απείρως ελαφρύτερο του συνήθους σιδερένιου αλλά ίσης αντοχής
— Διαπνοή 800% ανώτερη του Ευρωπαϊκού Προτύπου EN ISO 20345- 5.4.6
— Μέγιστη άνεση για ολοήμερη χρήση
— Καλή ευστάθεια είτε περπατά είτε τρέχει κανείς, ακόμη και σε ανισοεπίπεδα εδάφη
— Εξώσολα 20% ανθεκτικότερη του Ευρωπαϊκού Προτύπου EN ISO 20345 5.8.3 . Ανθεκτική σε φωτιά/θερμότητα, σε έκθεση σε έλαια/καύσιμα και αντιστατική. Αντιολισθητική στον μέγιστο βαθμό SRC.
— Η σύνδεση (“τσιμέντωμα”) σόλας με υπόδημα είναι 70% ισχυρότερη του Ευρωπαϊκού Προτύπου EN ISO 20345 5.3.1.2
— Ένθεμα από συνθετικό υλικό “Zero mm Perforation”, πάχους ~ 3,6 χιλ. που καθιστά την σόλα αδιάτρητη από πιέσεις 1100 Newton σύμφωνα με το Ευρωπαϊκό Πρότυπο EN 12568:2010. Τα συνθετικά ενθέματα προστασίας από διάτρηση έχουν αποδειχτεί πολύ ανώτερα των μεταλλικών και λόγω βάρους και λόγω αντοχής στην υγρασία και λόγω της δυνατότητας προστασίας μεγαλύτερης επιφάνειας.
— Απορρόφηση κραδασμών στην φτέρνα 100% ανώτερη του Ευρωπαϊκού Προτύπου EN ISO 20345 6.2.4
— Επένδυση GORE-TEX® Performance Comfort, που το καθιστά αδιάβροχο ακόμη και μετά από 300.000 “τσακίσματα” (βήματα) ενώ είναι ιδανική για μεταβλητές κλιματικές συνθήκες και υπαίθριες δραστηριότητες
— Μαξιλάρι απέντασης αχίλλειου και μαλακή επιφάνεια κνήμες επιτρέπει ελευθερία κινήσεων
— Προστασία αστραγάλων
— Φερμουάρ ταχείας προσαρμογής που ανοίγει πλήρως για εύκολο καθαρισμό
— Κορδόνια από NOMEX®, πυράντοχα και ισχυρά
— Ραφές από KEVLAR®
— Διαθέσιμο σε Νο 41, 43
6200/GA FOREST RESCUE BOOT
• Safety footwear for wildland fire, civil protection and public order
• Upper carried out with a new aramid fabric reinforced with Kevlar®, very breathable, water-repellent and flame resistant
• New extremely light 200J safety toecap Novation RTM (Resin Transfer Moulding), made out of composite material
• Highly breathable (breathability of the fabric upper is 800% (!) higher than the European Standard EN ISO 20345- 5.4.6 requirement)
• High quality safety shoe offering the maximum comfort level for long-day usage
• The lightest fire boot currently available in the market
• Good stability both for walking and running also on uneven grounds the outsole is 20% more durable than the European Standard EN ISO 20345 5.8.3 requirement
• The energy absorption in the heel area is 100% higher than the European Standard EN ISO 20345 6.2.4 requirement.
• Lining: GORE-TEX® Performance Comfort footwear, excellent for various climate conditions and for outdoor activities
• Padded rear flexors for an increased fitting comfort
• Ankle protection, and abrasion resistant front guard
• Rear leather pull-on loop
• New last with trekking fitting
• Extremely light thanks to its new PU-rubber sole
• Total opening zipper easy and fast to clean
• Outsole resistant to fuel, oil, heat and flame with antiperforation insert; the sole bonding strength is 70% higher than the European Standard EN ISO 20345 5.3.1.2 requirement; SRC slip resistance.
• The energy absorption in the heel area is 70% higher than the European Standard EN ISO 20345 6.2.4 requirement
— Upper: Next-generation technology aramid fabric reinforced with Kevlar®, very breathable, water-repellent and flame resistant combined with full-grain cowhide leather, waterproofed, black, 1.8 – 2.0 mm thick.
— Collar, flexors and tongue: Soft aniline leather, waterproofed, black, 1.0 – 1.1 mm thick, padded with foam to improve fitting comfort.
— Front and heel protection: Bycast leather, black, 1.8 – 2.0 mm thick
— Lining: Seam sealed 3 ply laminate (GORE-TEX® Cambrelle 3ly), foamed bootie
construction:
Layer 1 – Cambrelle 100% PA
Layer 2 – Waterproof and water vapour permeable membrane ePTFE
Layer 3 – Backing fabric knit 100% PA
— Reflecting insert: Reflex Scotchlite 3M material, red.
— Toe cap: New extremely light 200J safety toecap Novation RTM (Resin Transfer Moulding), made out of composite material and silicon fibres. Asymmetric with supporting base, manufactured and tested according to the Standard EN 12568:2010. It is positioned between the leather upper and the lining, it cannot be removed without damaging the whole boot. A plastic soft padding on the upper edge of the cap protects the feet while flexing.
— Heel cap: 1.8 mm resinated synthetic bonded fabric, thermally mouldable.
— Ankle protection: Heat moulded material with shock-absorbing properties.
— Rear loop: Leather loop 25 mm wide
— Zip Closure: Exclusive zip closure completed with 8 couples of nickel-free eyelets, non rusting,
with a 5 mm inside diameter. The metal slider is running on plastic teeth, which are protected by leather on the front part.
— Sewing thread: Kevlar® Filament, permanent flame-retardant, black.
— Eyelets: Burnished brass, non rusting, 5 mm inside diameter.
— Laces: Meta-Aramid Filament (Nomex®) round laces, black, fire-resistant and waterrepellent treated.
— Lace-clip: At the ends of the lace are positioned 2 plastic clips with an inside spring system, to allow the optimum lace fixing.
— Foot-bed: Anatomically shaped, made out of a layer of moisture transmitting felt (80% PES20% VISCOSA), and with an upper covering made of anti abrasion non-woven material 100% PA. In the heel area is positioned an insert of EVA foam for the best comfort of the foot enabling to preserve the foot anatomy and to increase the energy absorption on the heel.
— Insole: Special antistatic felt, 2.5 mm thick.
— Antiperforation insert: Abt 3.6 mm thick insert made out of special anti-perforation composite textile material “Zero mm Perforation” at 1100 Newton according to EN 12568:2010.
Textile antiperforation inserts, compared to the old style metal plates, offer considerable ergonomics and safety advantages: more protective surface,
flexibility, insulation, humidity and impact absorption, reduced weight.
— Sole: Bi-component sole composed by an injected shock-absorbent low density PU
layer (density lower than 0.50 g/cm3) resistant to hydrolysis and a rubber running surface, antistatic, resistant to oil and petrol, to flame and contact heat at 300°C, with energy absorption in the heel area, slip resistant thanks to its >4.0 mm high self cleaning cleats. Highly wear resistant.
— Weight/pair: abt 1750 g (size 42)
— Back height: abt 23 cm (sole included) (size 42)
— CE certificate: EN 15090:2012 F1PA HI1 T CI AN SRC Category III P.P.E
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.